Krishna House, Azad Nagar, Khemani,
Ulhasnagar - 421 002, Mumbai,
Maharashtra, India.

Tel./ Fax no. :+91 251 2713451

Mobile No.: +91 94 22 076 287 /+91 95 45 176 287

Email :

Sigma 1071 Lubricated non-graphited long vegetable fibre Braided Packing
ITEM : Sigma 1071

PRODUCT NAME : Sigma 1071 Lubricated non-graphited long vegetable fibre braided packing



APPLICATIONS / USES : This is a specially developed lubricated non-graphited long vegetable fibre braided packing for marine applications. It has been further lubricated with a low friction dry lubricant to enhance anti-friction property for use in sea water and fresh or river water applications, water wheel shafts or rudder and stern glands
History & knowledgebase on Asbestos Products
Some of the first uses of asbestos insulation occurred in the latter half of the 1800s where hot-temperature pipes were a concern. Heat insulation containing asbestos was used for the first time in 1866. A few years later in 1870, the mineral was mixed with cement for boiler coverings. By 1874, asbestos insulation products reached commercial production and were sold on a mass scale.

Asbestos Insulation helps conserve energy, lower sound volume, reduce electrical conductivity, and retain hot and cold temperatures. Asbestos, a fire-resistant mineral that was cheap, durable and a poor conductor of electricity, naturally became a key ingredient of these products.

Asbestos packings and gaskets are made by different techniques. Yarn can be twisted or braided into different shapes conforming to packing. or gasket requirements. The braided forms or asbestos fabrics can be coated, or impregnated with different compounds.
Asbestos cloth is one of the bases for sheet packing, folded, and wound packing. These packings in turn are formed into various shapes and sizes.

Sheet asbestos packing is considered one of the first applications of asbestos in the form of packing. This type of packing is available with such different combinations as wire reinforced asbestos fabric, graphite impregnated asbestos fabrics and others. Metallic products can be made from woven cloth which contains asbestos yarn-metal core. This type of construction, impregnated with the various binders, has been very popular and useful in the manufacture of gaskets and packings.

Numerous government specifications are available which pertain to
asbestos gaskets and packings. The asbestos packing or sheet requirements generally specify type and amount of fiber in proportion to binders and other additives. Parts can be used at temperatures up to about 700°F. For example, for the higher temperature resistant rubber packings, the composition generally specified includes 70 to 75 per cent, by weight asbestos fiber, 9 to 16 per cent rubber, 1 1/2 to 1 per cent sulfur, and 10 to 14 per cent mineral fillers.

Braided asbestos packing, which is rubberized and graphited, is suitable for high pressure and high temperature applications. See Figure 10.1. Approximately 10 per cent rubber together with such suitable fillers as talcum and graphite is added in this type of product in order to thicken and build up the body of packings. Graphite is a very popular additive since it principally provides low frictional and binding properties.
   Sigma 1008A Asbestos Dry Plaited Packing   Sigma 1017L Lubricated and graphited Asbestos Packing
   Sigma 1026W Asbestos Packing with white metal wire   Sigma 1035B -- Brass wire reinforced asbestos yarn packing
   Sigma 1053 High grade asbestos fibre yarn   Sigma 1071 Lubricated non-graphited packing
   Sigma 1044 Braided from high grade asbestos yarn   Sigma 1098 Asbestos Tape proofed with Rubber metallic & non metallic

True Value Gland Packings and Gaskets